
The Dish Network User's Resource
There are several things you will need to know if you intend to self-install or add to a Dish system.
If you have a dual-tuner receiver, it is important to understand the distinction between "receiver" and "tuner." A receiver, or IRD (integrated receiver-decoder), can have 1 or 2 tuners. Each tuner must have its own satellite input. If you have DishPro or legacy switches, each dual-tuner receiver is counted as 2 tuners, each of which must have its own line to the switch. On the DishPro Plus chart note that number of tuners is replaced with number of receivers since a dual-tuner receiver can be fed by a single run of RG6 from a DPP switch when used in combination with a DPP Separator behind the receiver.
Updated 1/19/09, added related link to DishPro Switches
| # Tuners | 1 Sat | 2 Sat | 3 Sat | 4 Sat | 5 Sat |
|---|---|---|---|---|---|
| 1 |
|
|
|
|
|
| 2 |
|
|
|
||
| 3 |
|
|
|
|
|
| 4 | |||||
| 5 - 6 |
|
|
|
??? | |
| 5 - 12 | Trunk 2 or 3 DP34 or DPP44 switches in a chain. | ??? | |||
| Over 6 | Contact Dish for for authorization or for commercial or MDU installation. | ||||
| # Receivers | 2 Sat | 3 Sat | 4 Sat |
|---|---|---|---|
| 1 |
|
|
|
| 2 | |||
| 3 |
|
|
|
| 4 |
|
|
|
| 5 - 12 | Trunk 2 or 3 DPP44 switches in a chain. | ||
| Over 6 | Contact Dish for for authorization or for commercial or MDU installation. | ||
Dish 1000.x = Dish 1000.2 or Eastern Arc Dish 1000.4.
| # Tuners | 1 Sat | 2 Sat | 3 Sat | 4 Sat |
|---|---|---|---|---|
| 1 | Single or Dual LNBF |
|
|
|
| 2 | Dual LNBF |
|
|
|
| 3 | Standard 4-output multi-switch |
|
|
|
| 4 | ||||
| 5 - 8 | Standard 8-output multi-switch |
|
|
|
| Over 8 | For over 6 receivers or 8 tuners, contact Dish for commercial or MDU installation, or consider converting to DishPro. | |||
Edited by BobaBird. Submissions & corrections welcome!